Broadcom Corporation 10/100/1000 NetXtreme Ethernet DOS ODI driver. For use on PCs running DOS version 6.22 only. To use to login to a Novell Netware Server use the Novell ZENWorks Starter Pack to setup and configure your PC. To login to NETBEUI/NDIS environments please use Novell's ODINSUP.COM protocol as a link between the B57 DOS ODI driver and the NETBEUI/NDIS protocols. CUSTOM KEYWORDS for net.cfg: BUSNUM DEVNUM FUNNUM SUBVID The first three keywords are used concurrently and have been included for manufacturing purposes. Do not use them unless you are familiar with PCI device configuration. These three keywords are needed if multiple NetXtreme boards are on a system and (a) specific NetXtreme adapter/s need to be loaded in specific order. BUSNUM specifies the PCI bus number and DEVNUM specifies the device number given to the board when configured by the PCI BIOS. The FUNNUM keyword is used to determine the function/port the driver is to load on when using a mutilfunction (multiport) adapter. Function number values are limited to 0 & 1, for the 1st & 2nd function of the adapter. The driver will always load on function 0 when this keyword is not used. The SUBVID keyword is for loading the driver only on the first NIC found that has a sub-vendor ID (SVID) that matches the one set in NET.CFG. The driver will ignore all other NICs that do not have a matching SVID. SUBVID expects a hexadecimal number. These adapter configuration values are printed out on the screen in hexadecimal notation when the driver loads. A PCI device scan utility can also be used to find this information. The NET.CFG file expects hexadecimal values. Example: If the driver loads on a single adapter, the values displayed on screen can be used in the NET.CFG file. If a PCI scan utility displays card 1 at bus 4 and device 11(hex) and card 3 at bus 3 device 13 hex then the following would be put into net.cfg to load card 3 first and optionally load card 1 second: LINK DRIVER B57 BUSNUM 3 DEVNUM 13 (13 hex = 19 decimal) LINK DRIVER B57 BUSNUM 4 DEVNUM 11 (11 hex = 17 decimal) The driver will always load on the first device detected when these keywords are not used. Example: LINK DRIVER B57 SUBVID 14E4 SUBVID cannot be used with BUSNUM, DEVNUM or FUNNUM.